circulation

One of the truly elegant things about the National Gallery is the way I. M. Pei uses movement through the building. The structure makes reference to the city plan of Washington in several ways, beginning with a series of diagonal rifts that split the solid block of the building into triangular prisms, echoing the Baroque geometry of the streets outside. Inside, the theme of diagonal circulation reappears in the cascading stairs and escalators of the main atrium. Diagonal movement gets translated into the vertical dimension. It produces a beautiful space which offers just the right amount of room for the small number of extraordinary works on display.

The National Gallery is a good example of how poetic circulation can be. Besides referring to the city's streets - the horizontal circulation of the metropolis - the stairs and escalators generate shifting views of the art displayed, allowing multiple perspectives onto each work

Here's what the stairs and escalator look like in motion, as recorded on an iPhone.

touch

Walking to the National Mall in Washington today, I remembered how hard it is to pass by the East Wing of the National Gallery without stopping in. It's like visiting an old friend. And while pausing to say hello to the sculpture by Richard Serra and the painting by Robert Motherwell, we were struck by that other famous quality of the building - the way it invites the visitor's touch.

I. M. Pei's building has always compelled people to touch it, and I'm not sure why. It makes sense in the parts where the whole building comes to a sharp point - you just want to touch that prow, or whatever it is - but throughout the building there are stains on the walls right at the height of a visitor's hand, where countless museum-goers have left a little oily trace of their visit. It's the remarkable gift of this richly complex building that it engages people in such a warmly physical way.

You've got to love a building that makes you want to touch it:

lumber

We've designed the house to avoid using softwood lumber as much as possible. This is the kind of wood that's typically used for framing (as 2x4s and 2x6s) or furring (the thin pieces of wood used to attach gypsum drywall to concrete block walls) in conventional construction. The two major problems with using softwood lumber in Miami are termites and mold.

However, it turns out we need to use a few 2x4s in the house...

ductwork

Our mechanical contractor began installing ductwork this week. The segment in the living and dining rooms (pictured here) is the most prominent piece in the house, and it was the first to go up. It will remain exposed, along with the structure and the electrical conduit.

The ductwork has a layer of insulation between two walls of metal to keep the air as cool or hot as possible between the air handler and the register. This kind of ductwork is more expensive, but the insulation makes the system more energy efficient and prevents condensation building up on the ductwork, and the metal lining inside helps keep the air free of dust and mold.

The ductwork also responds beautifully to the changing light conditions inside the house:

roof panels

Our steel erector began putting the insulated roof panels up this week. Together with the insulated wall panels and the metal trim, this comprises the final layer in the prefabricated shell of the house. The panels themselves are pretty impressive:

tagged, again

At some point in the last 24 hours, we got some new graffiti at tin box. Somebody made a spray paint stencil and tried it out on our construction fence (left, and after the break), and on the electric pole next to our house. Cool tag. The art is definitely improving around the house.

Day job, lectures and exhibition edition

Last night, my friend Aziza Chaouni spoke at FIU about the work her firm, Bureau E.A.S.T., has done in Morocco. She also gave our students a preview of the exhibition that will open this evening, Salon de B.E.A.S.T., as part of the Humanities Afternoon organized by FIU's African and African Diaspora Studies program.

satellites and camera cars

Cartography might once have been understood as the documentation of an unchanging earth, whose coasts and continents needed only to be discovered and charted a single time. Now, cartography seems more like an act of constant surveillance of a world in a constant and unending act of transformation. The Google street view photos of the neighborhood around tin box have been updated to show the site as it was back in April, when rough plumbing was going in under the slab. The satellite view is unchanged since July, when Google showed the site as had been since excavation in March:

site visit with Kaelsie

We met on site with Kaelsie Saravia, our cabinet maker, yesterday. We came out to finalize the layout of the cabinets in the kitchen and to verify the dimensions of the walls, since the walls have moved a little in response to where the plumbing ended up. Kaelsie is also an architect - you can tell by the way she and Holly are talking with their hands in the photo - which gives her a keener understanding of the details, proportions, finishes and alignments we're trying to achieve.

After the break, a video panorama of the house, so far:

thinking of Nigel Tufnel

Well, if you're going to crank your amps to 11, you're going to need some electricity. Our electrician, Celestino, has started roughing in the flexible blue conduit (Electrical Nonmetallic Tubing, or ENT) that will carry the power and control lines through the interior partitions. We've been reviewing the locations of the outlets and tweaking the electrical plan to make sure our outlets are located where they're most needed - near dressers or tables, for example - while also meeting the code requirements that there always be an outlet within six feet of a door, and then spaced no more than twelve feet apart after that.

view

An exciting moment at the site today. The subcontractor responsible for putting up the roof and wall panels took down the construction fence to give their forklift better access around the house. For the first time, we got to see the park from the house, without the green vinyl fencing in the way. It was spectacular.

Since we started planning the house, we've been anticipating that the living and dining room windows would frame a view of the park, with the street edited out by the low wall beneath the window sills. Today, we got to see this relationship for the first time. We also got to see the house from the park...

neighbors

One of the reasons we chose South Miami - and this particular corner of South Miami - to build our home was the sense of community in the area. We liked the neighbors we'd already met, and we felt that the house could contribute - even if just in a small way - to strengthening the neighborhood's sense of community.

At the same time, we know the house is not going to earn universal acclaim. One woman who drove by the other day seemed particularly disturbed to find out this was a house. She assumed it was some kind of support structure for the park across the street.

But then there's the teenagers who rode their bikes by yesterday. One yelled to the others, "that's a [expletive deleted] cool house!"

We agree.

[pictured: our new steel erector completing the frame on Tuesday.]

partitions, p.2

In the week since we wrote about laying out the interior partitions, Pedro and his crew have completed most of the framing. The light gauge studs and track, which were supplied as part of the prefabricated system (along with the heavy steel frame and the insulated exterior panels), go up pretty quickly. The studs are easy to cut, carry and fasten, and they have holes in them to allow plumbing and electrical lines to be laid easily. The metal studs also have the environmental advantage of being made largely from recycled steel.

day job, Casablanca edition

I spent last week at the 5th African Perspectives Conference in Casablanca. The conference organizers included ArchiAfrika, whose 2007 conference in Kumasi, Ghana, gave me my first opportunity to discuss Italian colonial architecture and urbanism in a public forum. This conference focused on the issues confronting African mega-cities, which isn't yet a part of my research. However, I was able to present a poster outlining my ongoing work in the Horn of Africa (and which I've expanded into a forthcoming article), and I was honored to be invited to participate in a roundtable discussion on education (my presentation is linked here).

partitions

Our superintendent, Pedro, sent these photos of the work he and his crew did this morning, laying out the partitions (interior walls) throughout the house. This gives us a chance to check the locations of all the partitions and look out for conflicts with the pipes and conduits coming out of the floor slab and the beams and purlins overhead. Once we approve the partition layout, Pedro will start putting down the light-gauge steel track which will hold the wall studs in place. This gives us an even better idea of the scale of the rooms in the house, too.

In fact, this is one of those moments when the house will "shrink," at least perceptually. There are points during construction when the project seems to grow - like when the floor slab is poured - and moments when it seems to contract, such as when the foundations are excavated.

props for Tricky Dick

Could Richard Nixon get the Republican presidential nomination these days? Whatever else Nixon was responsible for, he also signed into law some of our country’s foundational environmental legislation, including the National Environmental Policy Act (1969), the Clean Air Act (1970), the Clean Water Act (1972), and the Endangered Species Act (1973). Without Nixon, many of our iconic animal species – bald eagles, alligators, bison – would be extinct. Remember back when you couldn’t see the Los Angeles skyline through the smog, or when the Cuyahoga River caught fire? Take a deep breath and thank Richard Milhous Nixon.

edible landscape

The Fairchild Tropical Botanic Garden is holding its Edible Garden Festival this weekend. The event includes demonstrations of gardening, composting and cooking, and is intended for people who only have room for one container on their balcony, as well as folks who have an acre to plant. Plus, they've got food trucks.

We had a chance to stop by yesterday and take notes on soil (use lots of rich, organic material and perlite), the need to use raised beds, and good combinations to plant (tomatoes and peppers like to be neighbors).

urgency

An important new report this week gives new urgency to our efforts to slow the pace of climate change. Richard Muller, a physics professor at Berkeley whose critiques of climate science have earned considerable support among climate change deniers, released the results of a two-year study of surface temperature data  from the last two hundred years. His conclusions? The earth is warming, and the pace of warming is increasing at a disastrous pace. As Kevin Drum writes in Mother Jones, not only is the rate of warming accelerating, but Muller's findings are even more alarming than those of some of the other scientists whose methodologies he faulted.

more bike lanes

bike lane, SW 72nd Street

Three reasons automobile drivers should love dedicated bicycle lanes:

bike lanes

Props to our local governments – the City of South Miami and Miami-Dade County – for continuing to build bike lanes and better sidewalks in the community. We have a long way to go, but the county’s efforts to provide bike lanes, shade and better pedestrian crossings are gradually improving our streetscape.

The recent improvements to 62nd Avenue are – hopefully – a harbinger of a better interventions to come. They show a good grasp of some important urban design practices:

thinking about Apple

Macintosh 128K Home Computer,
designed by Steve Jobs and  Jerry Manock, 1984.
Museum of Modern Art, via ARTstor.

It is touching to see the volume of tributes to Steve Jobs coming from people like us – not journalists or public figures, but regular folks addressing second-person messages to a man they’d never met, delivered via social media, and typed out on devices that didn’t exist just ten years ago. Since tin box was designed, blogged and filmed on Macs and iPhones, we thought we should share some of the lessons (for architecture and culture) we learned from our computers:

no biking in the house

It's my house, and I'll bike if I want to.

cutting room floor

Venturi Scott Brown and Associates
Franklin Court, Philadelphia

The most important part of writing is editing. It is also the most painful. As part of a chapter on postmodern architecture I wrote for a forthcoming survey of world architecture since 1960, I wrote a couple of paragraphs on Venturi and Scott Brown's Franklin Court project in Philadelphia, a place I first encountered as a kid, and loved. And then my co-editor chopped these paragraphs out. Fudge.

action photos

Steel construction makes for some pretty cool photos.

Here, one of the erection crew is trimming some of the roof decking. Of the scores of panels of B-decking used in the house, only two needed to be trimmed. This efficiency - less material used, less waste on site, lower transportation costs - is one of the advantages to prefabrication.

One disadvantage is the need for specialized (read: expensive) machinery, like boom cranes...

roof decking complete

The erectors completed the roof decking this morning. We're now ready for the insulated roof panels to go up (then wall panels, then windows and doors). The house is looking pretty cool.

unintended irony, golf cart edition

photo by Adam Feinstein

Kudos to FIU for investing in golf carts with solar panels on the roof. Self-powering vehicles are an ingenious idea, especially in a sunny place like Miami. It will work more efficiently, though, when the drivers stop parking in the shade.

Our pursuit of more sustainable practices sometimes requires rethinking pretty good habits. Generally speaking, it's a good idea to park in the shade in Miami. Our black bicycle saddles reach osso-bucco-braising temperatures after just a minute in the sun, and the Prius gets hotter than an EasyBake oven if you leave it in the sunlight. It's probably hard to break these habits when you sit behind the wheel of an electric golf cart. And there are probably much bigger paradigms we need to change as we retool our civilization to prevent catastrophic climate change.

landmarks and leftovers

At some point last night, tin box recorded its 10,000th page view. A lot of our traffic comes through postings on Facebook, where we entertain a fair number of good questions from our friends and family. We wanted to share some of that correspondence.

the week ahead

Looking forward at the week ahead, we're anticipating a lot of work at tin box. Our erector should be able to finish installing the roof decking this week (we're still waiting on two pieces of steel that weren't shipped with the z-purlins). The exterior roof panels arrive Tuesday, and should start going up right away. Our panel manufacturer plans to begin fabricating the exterior wall panels Monday and deliver them to the site Friday.

Meanwhile, the neighbors clearly approve of the project...

decking

Our erector started installing the roof decking yesterday. These gorgeous corrugated sheets are High Shear B Deck (HSB-36), a structural roof decking that comes in 36" wide and 1.5" deep sheets. The decking is fastened to the z-purlins with TEK screws (which don't need a pre-drilled hole), and will act as a structural diaphragm under the insulated roof panels, which are also structural. Together, the decking and roof panels will deal with the combination of tensile, compressive and shear forces generated by hurricane force winds. They will also support the weight of the vegetated roof that we plan to add someday.

The B Deck will also make for a great ceiling, in combination with the z-purlins...

roof

From the Kingspan factory in Deland, FL, comes this progress photo of our roof panels. Our roof uses KingZip insulated metal panels with a standing-seam joint. We chose 4" thick panels, which will give us an insulating value of R-32 (exceptional by Florida standards). We could have gone up to 6" thick, which yields R-48, but this would be a bit excessive in South Florida.

Each 42" wide panel will hold two solar panels, which adhere directly to the steel surface of the roof panels. The panels have a galvalume finish whose high albedo value (a measure of reflectivity) means they will reflect most of the sunlight that hits them, minimizing the direct heat gain.

The roof panels are cut to length in the factory, which helps eliminate on-site waste and reduce energy wasted in transit (one benefit to prefabrication). The pieces can come in lengths up to 52', the length of a flatbed truck. Our longest pieces are about 32'. We'll write more about the roof when it starts arriving, early next week.